Samlex SA-1000K-112 SA Series Pure Sine Wave DC-AC Power Inverter, 12 Volt, 1000W Continuous Output Power, 2000W Surge Output Power, Isolated input and output
This high efficiency microprocessor controlled DC-AC inverter converts 12 Volts DC (Nominal) to 1000 watts of pure sine-wave AC power at 110 Volts, 60 Hz
Key Features
- Isolated input and output
- Load controlled cooling fan
- Advanced microprocessor design
- Output frequency 50/60 Hz switch selectable
- Power saving mode to conserve energy
- Protections: overload / short circuit, reverse polarity (fuse), over/under input voltage, over temperature
- Tri-color indicators display input, output level & failure status
- Pure sine wave output (THD < 3%)
- 1 load controlled cooling fan saves power consumption
Specifications
- Output Voltage: 110 VAC, +/- 5%
- Peak Efficiency (At full load): 89%
- AC Output Connections: Dual NEMA5-20R receptacles with GFCI protection
- Nominal DC Input Voltage: 12 VDC
- DC Input Voltage Range: 10.5 to 15 VDC, +/- 0.2 VDC
- DC Input Connections: M-8 screw/Wire with M-8 ring lug terminal
- Enabled/Disabled By Switch: Wake up power: 20 to 135 W (switch selectable)
- Wired Remote Control (Optional): SR-8 or SR-6-12
- Forced Air Cooling: 1 load controlled fan: ON > 150W ; OFF < 80W
- Operating Temperature Range: 0°C to + 40°C
- Storage Temperature Range: – 30°C to 70°C
- Dimensions: 15.5″ x 7″ x 3.5″/39.4 x 17.8 x 8.9 cm
- Weight: 9 lbs/4.08 kg
12 Volt, 1000W Continuous Output Power, 2000W Surge Output Power
Isolated input and output, Load controlled cooling fan, Advanced microprocessor design
Output frequency 50/60 Hz switch selectable, Power saving mode to conserve energy
Protections: overload / short circuit, reverse polarity (fuse), over/under input voltage, over temperature
Tri-color indicators display input, output level & failure status, Pure sine wave output (THD < 3%)