Diesel Gasoline Gas Genset Generator Engine Control Module Panel 4.3 inch LCD Auto Automatic Start Stop Generator…

Description

DC70D: single machine automation. Start/Stop through remote start signal

DC72D:adds Mains monitoring and AMF

DC7XR: adds Rs485 port.

Main Features:

32 units Micro-procession technology is used

4.3 inch TFT colorful big screen LCD

Indicator and number display through UI surface；Acrylic material is adapted to protect the screen

Silicone panels

USB Port: parameters can be set even without power through USD port to monitor in real time

With RS485 communication port, can achieve “Three Remote” functions via  MODBUS protocol

CAN communication port, J1939 protocol inside

Various kinds of parameters display

Input/output function, status can be shown directly

More categories of surface setting

Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month

Three class protection countdown function, which can set the maintenance time or date

Records function: relative faults shall be recorded in real time

Totally 7 relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals

5 relays can be set as switch value input, and each can be set as max 40 functions

4 sensor simulation input connectors, 6 input types is configurable and various kinds of units can be set

Battery charging control function,which can protect the battery according to battery voltage status

Sensor can be self-defined by front face button or PC software

Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)

Various of crank conditions(RPM,Frequency, Oil Pressure) can be chosen

Control Protection:Auto Start/Stop of genset,load transfer (ATS control) and perfect failure display and protection

Standard water-proof rubber gasket. The waterproof can reach IP54

Module design

This series controller is specialized for Diesel / Gasoline / Gas Genset Start/Stop, Parameters monitoring, faults-checking as well as data setting. 4.3 inch colorful LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words.Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can not work smoothly.
Parameters Display: Engine RPM; Engine oil pressure; Engine water temperature; Engine fuel temperature; Engine cylinder temperature; Engine Tank temperature; Engine fuel level; Engine battery voltage; charging voltage; Mains Frequency (only for DC72D); Mains phase voltage L-N(only for DC72D); Mains phase voltage L-L(only for DC72D) Generator 3 Phase voltage L-N; Generator 3 Phase voltage L-L; Generator 3 phase current A; Generator Frequency Hz; Generator Power Factor COSφ
Parameters Display: Generator active power KW; Generator apparent power KVA; Generator reactive power KVar; Current loading rate %; Total average loading rate %; Current consumption KWH; Total consumption Kwh; Total Crank times; Current running time; Total running time; Three classes maintenance notice
Protection: Over/under speed; Low oil pressure ; High water temperature; High Oil temperature ; High Cylinder Temperature; High Tank temperature; Low fuel level; Low oil level; External emergency alarm; D+ Opened; RPM Lost; Sensor Open; Over/Under Frequency; Over/Uner voltage; over current; Non-balance of current; Over power; Lack of Phase; reverse phase sequence; Gen load/unload failure; Mains Load/unload failure; Primary/Secondary/Third maintenance expire; ECU alarm failure; ECU communication
Protection: Low water level alarm; Emergency Stop; Crank failure; Over/under battery voltage; Charging failure ; Battery Charging failure; Stop Failure & There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC.It can be widely applied for all kinds of auto control system of gensets