Generic DT-619 CFM/CMM Digital Anemometer

Description

DT-619 CFM/CMM Thermo-Anemometer with IR temperature
CFM/CMM Thermo-Anemometer with built-in
non-contact IR Thermometer measures remote surface temperature to 280ºC (536ºF) and 8:1 distance to spot ratio.
Features：
1.Simultaneous display of Air Flow or Air Velocity plus Ambient
2.Temperature(619/620)
3.Easy to set Area dimensions (cm2) are stored in the meter´s internal memory for the next power on(619/620)
4.Resolution of 0.01m/sec (619/620)
5.20 points average for Air Flow (619/620)
6.Super large LCD Backlit Display(618/619/620)
7.3% velocity accuracy via low friction 2.83″D (72mm)
ball bearing vane wheel on 3.9ft (120cm) cable(619/620)
8.Type K sensor for temperature measurements (618/618B)
9.High Sensitive and Accurate
Air Velocity
1.m/s(meter per second)
Range: 0.40~30.00
Accuracy: ±3%±0.20m/s
2.ft/min(feet per minute)
Range: 80~5900
Accuracy:±3%±40ft/min
3.km/h(kilometers per hour)
Range:
1.4~108.0
Accuracy:±3%±0.8km/h
4. MPH(miles per hour)
Range: 0.9~67.0
Accuracy:±3%±0.4MPH
5.Knots(nautical miles per hour)
Range: 0.8~58.0
Accuracy: ±3%±0.4knots
Air Temperature
Range: -10-60ºC (14-140ºF)
Accuracy: ±2.0ºC(4.0ºF)
InfraRed Temperature
Range: -50 to -20ºC (-58 to -4ºF)
Accurany: ±5.0ºC(9.0ºF)
Range:-20 to 260 ºC (-4 to 500ºF)
Accurancy: ±2% reading or±2ºC(4ºF)
Air Flow
1.CFM Range: 0-999900
Area: 0-999.9 ft2
2.CMM
Range: 0-999900
Area: 0-999.9 m2
Wind Speed Tester
Anemometer
Air Flow Meter