Uniteco Cordless Electric Hedge Trimmer 20V with 2.0 AH Platform Battery and Charger HT001

Uniteco Cordless Electric Hedge Trimmer 20V with 2.0 AH Platform Battery and Charger HT001

Amazon.com Price:  (as of 05/02/2022 00:36 PST- Details)

1.Rated voltage:20V Li-ion battery 2000mAh , Cutting length:520mm , Cutting width:14mm
2.No-load speed:1200 rpm , Charger:INPUT – 100-240V~ 50/60Hz , OUTPUT – 21V DC 2200mA
3.The machine must be charged before first use.Battery charging time :1-1.5 hours , Red:Battery charging in progress. Green:Battery charging finished, battery fully charged.The battery can be stored or directly installed on the machine.

Description

Description:
in charging:red
fully charged:green
charging time:1-1.5 hours
No-load speed:1200rmp
INPUT – 100-240V~ 50/60Hz
OUTPUT – 21V DC 2200mA
20V Li-ion
battery 2000mAh
Cutting length:520mm
Cutting width:14mm
The grass trimmer is developed for cutting of grass and weeds, under bushes as well as on slopes.
The grass trimmer is ideal for cutting edges that cannot be reached with the lawnmower.

WARNING!
Do not expose battery to fire or intense heat as it may explode.
Battery contains acid.
If case should become cracked, dispose of immediately taking adequate safety precautions to prevent damage to persons or property.
Intended use is related to operation within 0°C and 40°C ambient temperature.
Do not use this machine in the rain.

Safety transport
The hedge trimmer has a transport protection cover for save transportation of the machine.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1.Rated voltage:20V Li-ion battery 2000mAh , Cutting length:520mm , Cutting width:14mm
2.No-load speed:1200 rpm , Charger:INPUT – 100-240V~ 50/60Hz , OUTPUT – 21V DC 2200mA
3.The machine must be charged before first use.Battery charging time :1-1.5 hours , Red:Battery charging in progress. Green:Battery charging finished, battery fully charged.The battery can be stored or directly installed on the machine.
4.Switching On and Off: (1)To switch the trimmer on, press the safety switch and the start switch at the same time.(2)To switch off, release one or both switches.
5.Red: Battery charging in progress. Green: Battery charging finished, battery fully charged.