SUNGOLDPOWER 10000W Peak 30000W Pure Sine Wave Power Inverter, DC 24V AC Output 220V 230V 240V Converter, with 60A MPPT…

Description

General specification:

Continuous Output Power :10.0KW

Surge Rating(20s) :30.0KW

Output Waveform :Pure Sine Wave

AC Output Voltage: 220-230-240Vac

AC Input Voltage:220-230-240Vac

DC Battery Voltage:24Vdc

Solar charger Current:60Amp

AC Battery charger:80±5Amp

Output Voltage Regulation :±10% RMS

Output Frequency :50Hz ± 0.3Hz /60Hz ± 0.3Hz

Typical transfer Time :10ms(Max)

DC Input:

Nominal Input Voltage :24.0Vdc

Minimum Start Voltage :20.0Vdc

Low Battery Alarm :21.0Vdc / 22.0Vdc

Low Battery Trip :20.0Vdc / 21.0Vdc

High Voltage Alarm :32.0Vdc

Low Battery voltage recover :31.0Vdc

Idle Consumption-Search Mode :<25 W when Power Saver On

Charger:

Output Voltage: Depends on battery type

Charger Rating :80A

Max Charge Power Rate: 1/3 Rating Power

Battery Initial Voltage for Start Up: 20-31.4V

Over Charge Protection Shutdown :31.4V

Remote Control :Yes

Bypass & Protection:

Input Voltage Waveform :Sine wave (Grid or Generator)

Nominal Voltage:230Vac

Nominal Input Frequency :50Hz or 60Hz

Bypass breaker rating: 80A

Solar Charger controller:

Rated Voltage :24Vdc

Solar Input Voltage Range: 30-70Vdc

Max.PV Open Circuit Array Voltage:105Vdc

Rated Charge Current :60A

Over Charge Disconnection: 29.6V

Over Charge Recovery :27.2V

Over Discharge Disconnection:21.6V

Over Discharge Reconnection :24.6V

Mechanical specification:

Inverter Dimensions(L*W*H) :588*415*200mm

Inverter Weight(Solar Chg)KG: 80

Display :LED +LCD

Standard Warranty :1 Year
*SP-PV Series Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system . It is packed with unique features and it is one of the most advanced inverter/chargers in the market today
*Frequency adjust: The frequency of the inverter is arranged by the SW4. The default configuration for 220/230/240VAC inverter is 50Hz, and 60Hz for 100/110/120VAC inverter. While the output freq can be easily changed once a qualified freq is applied to the inverter Protections:AC Input over voltage protection/AC Input low voltage protection,Low battery alarm/High battery alarm,Over temperature protection/Over load protection,Short Circuit protection (1sec after fault),Back feeding protection
*Applicantion:for all the kinds of load: circular saws, drills, grinders, sanders, buffers, weed and hedge trimmers, air compressors.computers, printers, monitors, facsimile machines, scanners. vacuum cleaners, fans, fluorescent and incandescent lights, shavers, sewing machines.coffee makers, blenders, ice markers, toasters.metal halide lamp, high – pressure sodium lamp.television, VCRs, video games, stereos, musical instruments, satellite equipment ect
*Our inverter is designed with AC priority by default. This means, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load.The AC Priority and Battery Priority switch is SW4. When you choose battery priority, the inverter will inverting from battery despite the AC input. Only when the battery voltage is reaches low voltage alarm,the inverter transfers to AC Input, charges battery, and switches back to battery when battery is charged full. This function is mainly for wind/solar systems taking utility power as back up
*SP-PV Series Inverter is equipped with a powerful charger of up to 120Amp (depending on Model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer. the max chargecurrent can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank. Fortunately, the liner switch can effectively reduce the max charging current to 20% of its peak. Choosing “0” in the battery type selector will disable charging function