Description

“B’oh Two Finger Spin Pin Anchor Shackle A twist (pun intented) on a standard D-ring bow recovery shackle our new B’oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins! We collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a stainless steel spin ring that spins freely while you rotate the pin. No more tangles. Where a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard. Unlike a traditional lifting shackles we beef up this 3/4in. bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle. All inner and outer edges feature large curved soft shackle friendly edges. The Moose Knuckle Offroad B’oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7/8in. (0.875in.) pin hole. Mohawk Receiver 2.0 The Mohawk 2.0 shackle receiver is warm forged using 6061-T6 aluminum with the grain flow orientated to maximize the strength. Two hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2in. hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3/4in. shank. Most shackle receivers have sharp edges at the connection point which often tear soft shackles. The Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion. The spined outer perimeter adds more material where you need it most. Shackle Specs: Item: B’oh Shackle Pin Style: Screw Pin Feature: Two Finger Spin Pin Ring Lanyard WLL: 10,000 lb. FoS (Factor of Safety): 5:1 Width Between Eyes: 1-1/4in. (1.25in.) Finish: Powder Coated Pin Diameter: 7/8in. (0.875in.) Thread Size: M22 x 2.5mm – 6H/6g Pin Body Material: Carbon Steel Receiver Specs: Material: Warm Forged 6061-T6 Aluminum Receiver Size: 2.0in. Shackle Size: 3/4in. shackles with 7/8in. pin diameter Coating: UV and Weather Proof Anodized w/ Laser Etched Logos WLL (Work Load Limit): 5t or 10,000lbs G.T.W. (Gross Trailer Weight): 3500lbs T.W. (Tongue Weight): 300lbs Ball Hitch Size: Spacer included to accept Class I / II hitch balls with 3/4in. shank dia. INNOVATIVE SHACKLES: A twist on a standard D-ring bow recovery shackle our new B’oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins! Pin Feature: Two Finger Spin Pin Ring Lanyard FoS (Factor of Safety): 5:3 WITH LANYARD: Where a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard. The lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail. Width Between Eyes: 1-1/4″” (1.25″”) Finish: Powder Coated EXTREMELY SAFE AND STRONG: Unlike a traditional lifting shackles we beef up this 3/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries. All inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear. PERFECT FIT: The Moose Knuckle Offroad B’oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7/8″” (0.875″”) pin hole and Width Between Eyes: 1-1/4″” (1.25″”). Thread Size: M22 x 2.5mm – 6H/6g Pin Material: Carbon Steel Body Material: Carbon Steel SPECS RECEIVER Material: Warm Forged 6061-T6 Aluminum | Receiver Size: 2.0 inch | Shackle Size: 3/4″” shackles with 7/8″” pin diameter | Coating: UV and Weather Proof Anodized Black w/ Laser etched Logos | WLL (Work Load Limit): 5t or 10,000lbs | G.T.W. (Gross Trailer Weight): 3,500lbs | T.W. (Tongue Weight): 300lbs | Ball Hitch Size: Spacer included to accept Class I / II hitch balls with 3/4″” shank dia. FoS (Factor of Safety) 5:1 Model Number: FN000033-003. Age Group: adult.”