GlobMarble Concrete Countertop Mold Edge Form CEF 7022 Ogee

Description

Concrete Countertop Mold Edge Form CEF 7022 Ogee. 10 ft. Sold by lineal foot. Minimum order 10F Concrete Countertop Mold Edge Forms are used to change the shape of the edges of a concrete element such as vanities and concrete countertops, table tops or stairs. The sizes, shapes and variations of each can offer a customized edge that will complement the countertop’s unique surface as well as the surrounding design. Concrete countertop mold edge forms designed to create detailed edge design with all concrete and GFRC mixes for both pre cast and cast in place applications. Concrete countertop mold edges come in a variety of shapes and sizes. Because concrete will take the shape of virtually any form or mold it is cast into it’s possible to produce the look of stone, rope edges, vines, and more. Concrete Countertop Mold Edge Form size: 1-1/2″ height x 120″ length (3.81cm x 304 cm) Sold by lineal foot. Minimum order 10F Edge Molds Flexible and reusable decorative form liners for concrete countertops, tables, furniture and more. Preparing the Form Edge Molds are designed to line a form built from rigid materials such as standard dimensional lumber, plywood strips, foam and angle iron. Installing Edge Molds Edge Molds are easily cut with a standard razor knife. Install against the rigid form using Pressure Sensitive Adhesive tape. Cleaning and Storage After demolding, the face of the Edge Mold can be wiped clean with water or denatured alcohol. Loosely coil the Edge Mold and store flat. With reasonable care you should expect Edge Molds to last for over one hundred projects! Edge Molds are flexible and may be made to conform to nearly any shape. Extremely tight radius corners may be achieved by warming the Edge Mold in hot water or with a heat gun. Use Edge Molds bare or with your preferred release Edge molds work with all concrete and GFRC mix designs Packaged in fifty foot lengths. We could cut the molds in to a 40F, 30f, 20F and 10F sections. Minimum order 10F
CONCRETE COUNTERTOP EDGE FORM CEF 7022 OGEE. 10 ft
Concrete Countertop Mold Edge Forms are used to change the shape of the edges of a concrete element such as vanities and concrete countertops, table tops or stairs. The sizes, shapes and variations of each can offer a customized edge that will complement the countertop’s unique surface as well as the surrounding design. Concrete countertop mold edge forms designed to create detailed edge design with all concrete and GFRC mixes for both pre cast and cast in place applications.
Concrete countertop mold edges come in a variety of shapes and sizes. Because concrete will take the shape of virtually any form or mold it is cast into it’s possible to produce the look of stone, rope edges, vines, and more.The concrete countertop mold edge forms are made of high strength, 40 Durometer urethane rubber that with proper care will offer a lifetime of use.
GlobMarble molds are designed to produce many parts and will last you many years by using a little common sense and incorporating a maintenance plan. The concrete countertop mold edge forms are extremely flexible and easily wrap around corners without mitering and can also be used on plywood or melamine to free form any shape of table or countertop. Trim to length with a standard razor knife.
The rubber is carefully selected to allow for easy coping and trimming for butt joints, inside, and outside corners. The mold edge details should be stored flat in cool dry areas out of direct sunlight. Concrete Countertop Mold Edge Form sieze: 1-1/2″ height x 120″ length (3.81cm x 304 cm) approximately