Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3′, 4′, 5′, 6′, 7′ and 8′ Chain Link Fence (8ft…

Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3′, 4′, 5′, 6′, 7′ and 8′ Chain Link Fence (8ft…

Amazon.com Price:  (as of 02/02/2022 07:52 PST- Details)

Add privacy and curb appeal to your existing chainlink fence
Designed for 8ft 11 or 9 gauge chain link with 2 inch diamond (see detailed description)
Each box will cover 10 lineal feet of fence when used with 2 inch diamond chain link

Description

8ft Gray Ridged SlatsTM by Slat WarehouseTM can be added to existing chain link fence to improve privacy, security, and aesthetics. Slats are economical and easy to install. Each box contains 82 slats and 10 feet of Viper Lock ChannelTM – enough to cover 10 linear feet of eight foot tall chainlink fence. Each individual slat measures 1.25 inches wide and can be installed in 11.5, 11, or 9 gauge chain link fabric with a diamond pattern ranging from 2 to 2.375 inches. Slats are approximately 80 inches long (4 inches shorter than the overall height of the chain link fence to facilitate installation). It is the owner’s responsibility to ensure your fence will withstand the increased wind load of adding slats. To install, simply slide the Viper Lock ChannelTM horizontally into the bottom of the first fully enclosed diamond of chain link (see details in pictures) and then slide each slat vertically through the diamonds of the chain link until it clicks into the locking channel. Take care to face each slat the same direction. DO NOT WEAVE in and out of the chain link. Chain link is woven in a way that leaves a space for the slat to slide down through the fence. Damaged or bent chain link fence may need to be repaired to facilitate slat installation. How much privacy can I expect? The amount of privacy achieved varies depending on the size of the diamond of the chain link used. The size of the chain link diamond is the space measured between two parallel wires in the diamond weave (not corner to corner). Two inch diamond requires approximately 82 slats every 10 feet providing 85 percent coverage (1.25″ x 82 ÷ 120″ = 85.4%). Economy chain link with a 2.375″ diamond requires approximately 74 slats every 10 feet providing 75% coverage (1.25″ x 74 ÷ 120″ = 77.1%). Chain link fabric with a diamond pattern larger than two inches will use fewer slats than provided in each unit. Extra Viper Lock ChannelTM is available for purchase to use with extra slats.
Add privacy and curb appeal to your existing chainlink fence
Designed for 8ft 11 or 9 gauge chain link with 2 inch diamond (see detailed description)
Each box will cover 10 lineal feet of fence when used with 2 inch diamond chain link
Provides approximately 75 percent privacy in chainlink fence with 2 inch diamond
Limited 10 year pro-rata warranty against breaking under typical conditions