265W Skid Mount Solar Generator – (1) 265W Panels – (2) 250aH Batteries – 24V DC Output

Description

Made in the USA The Larson Electronics SPGSM-.26K-2X250AH-24V skid mount solar generator is a stand-alone unit that offers 40 watts of continuous power at 24V DC for 24/7 operation. This generator features one 265-watt solar panel and two 250aH 12V batteries. It is suitable for remote locations without reliable access to the grid including: agricultural operations outdoor greenhouses farms emergency camps military bases and construction sites. Operators may use the generator to power electronics tools and industrial equipment. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This unit is comprised of one 265-watt solar panel generating 40 watts at 24V DC. The solar panel is mounted to a galvanized steel frame and wired to the solar charger control box which manages the charging system. The solar panel is mounted to a frame angled at 45 to capture the intensity of the sun for optimized light intake. This system delivers 24V DC output and can run a 40-watt device continuously with 9+ hours of sun. Solar Panel Assembly: This unit is comprised of one 265-watt solar panel generating a total maximum output of 265 watts. The panel is mounted to a stationary assembly. The panel is wired to the solar charger control box which manages the charging system. The solar panel is mounted to a frame angled at 45 to capture the intensity of the sun for optimized light intake. Solar Charge Controller: In this 24-volt solar control system each panel is terminated with a fused combiner box with a single lever action cut-off switch. With the switch set to the ‘on position the combiner box passes power to the charge controller. Oddly enough most charge controllers arent rated past 104 degrees Fahrenheit despite the fact they will always be close to direct sunlight. In the summer time in Texas our fabrication shop is normally warmer than that. We improve the cooling capability by shading the charge controller and adding additional air