Description
The Armor AX25 is a solvent based siloxane-infused acrylic cure and seal designed to enhance and protect new and existing concrete, and concrete pavers with a high gloss wet look. Will reduce damage and deterioration caused by water absorption and surface abrasion Can be used on new, uncured concrete to help aid with proper curing Meets ASTM C1315 and ASTM C309 standards Will enhance dull and faded surfaces with a high gloss wet look Easy to apply with a roller or sprayer to concrete and concrete pavers UV resistant, non-yellowing, breathable Can be applied to unsealed concrete and concrete pavers, and concrete and concrete pavers previously sealed with a solvent based acrylic concrete sealer. If you are looking to seal brick or natural stone, consider the Armor WL550 instead. Coverage Rate: Porous Surfaces: Up to 175 FT2/gallon in one coat. Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance. Model Number: AX251GAL. Age Group: adult.
