Description

“A twist (pun intented) on a standard D-ring bow recovery shackle our new grape escape B’oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins! We collaborated with our partners over at Owyhee Offroad Parts to solve the lost pin and lanyard tangle problem by adding a grooved channel around the pin flange that holds a weather resistant stainless steel spin ring that spins freely while you rotate the pin when removing or replacing the pin in the shackle body. This allows the lanyard to stay in one position, out of the way, without wrapping the lanyard around the pin as you tighten or loosen your shackle. Where a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard. The lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail. Unlike a traditional lifting shackles we beef up this 3/4in. bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries. All inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear. The Moose Knuckle Offroad B’oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7/8in. (0.875in.) pin hole and a mount width of 1-1/4in. (1.25in.) or less. All color options are fully covered with a durable coating pantone color matched to popular truck and Jeep colors. INNOVATIVE SHACKLES: A twist on a standard D-ring bow recovery shackle our new B’oh shackle incorporates an innovative Two Finger Spin Pin design to keep your pins and shackles joined together out on the trail. No more lost pins! WITH LANYARD: Where a lanyard would normally be attached and in the way this spin pin design also leaves your pin hole empty so you can insert a tool to tighten or loosen your pin without damaging the lanyard. The lanyard is made of 7 strand stainless 210 lb wire rope coated in black vinyl so it will not scratch your shackle or bumper as you bump your way down the trail. EXTREMELY SAFE AND STRONG: Unlike a traditional lifting shackles we beef up this 3/4 inch bow shackle by giving the body side profile a taper that thickens and adds more material through the length of the shackle making it extremely safe and strong to handle the toughest recoveries. All inner and outer edges feature large curved soft shackle friendly edges so they will not damage your recovery ropes and other towing gear. PERFECT FIT: The Moose Knuckle Offroad B’oh Shackle fits any bumper shackle mount or tow shackle receiver hitch bracket mount with a 7/8″” (0.875″”) pin hole and a mount width of 1-1/4″” (1.25″”) or less. CHOOSE THE BEST COLOR: All color options are fully covered with a durable coating pantone color matched to popular truck and Jeep colors. FoS (Factor of Safety) 5:1 Model Number: FN000023-004. Age Group: adult.”